Oil and Gas Courses in Hobart

Do you have trade experience and want to upskill into the mining sector? How about the 52892WA Advanced Diploma of Electrical and Instrumentation (E&I) Engineering in Mining? This nationally recognised diploma gives you a working knowledge of the latest electronic and instrumentation technologies used in the mining sector. The course introduces you to the theory behind electrical and IT systems while developing your technical skills in these areas. Graduate ready for high-end electrical work in mining operations. Enquire now for the list of study units, entry requirements, and upcoming course enrolment dates..

Looking for an apprenticeship as an electrical instrumentation technician? Try the UEE31220 Certificate III in Instrumentation and Control — it’s a nationally recognised training course completed on-campus in 7-week blocks. During your studies you’ll be working with a variety of tools that calibrate, adjust and repair the instruments used in a wide range of industries. Plus you’ll be learning the fundamentals of electrotechnology equipment and circuitry. Enquire now to find out your eligibility for this course, as well as funding possibilities, and career outcomes..

If you’re a qualified electrician the UEE40420 Certificate IV in Electrical - Instrumentation will qualify you for work as an Instrumentation and Control Technician. This training course is recognised all over Australia and you’ll complete your studies in less than a year. Graduate able to install, commission, calibrate and repair instrumentation and control equipment. Enquire now for the full list of study units, elective selections to suit your job role, and enrolment opportunities..

Get started in civil construction with the RII30820 Certificate III in Civil Construction Plant Operations. This nationally recognised training course accompanies an apprenticeship and teaches you how to work safely on a civil construction site. The course covers levelling, trenches, concreting, earthworks — and you’ll also have the opportunity to learn how to operate a range of heavy vehicles (depending on your chosen electives) including backhoes, graders, dozers, and excavators. Enquire now for more information about how to enrol and where to study..

The 52857WA Advanced Diploma of Plant Engineering is for experienced trades people who want to learn the latest plant engineering technologies. Over 18 months of study with professional trainers you will be introduced to the working essentials of plant engineering including mechanical equipment, fluid power systems (and their components), pumps and seals, HVAC systems, pressure vessels and boilers, thermodynamics, compressors, fans and blowers, instrumentation and control engineering — and much more. Enquire now for more information about graduation outcomes, study units, and entry requirements..

The 52883WA Advanced Diploma of Applied Electrical Engineering (Electrical Systems) is a hands-on engineering course that qualifies you for technical and project roles that involve instrumentation, electronics, and electrical power systems. This nationally recognised diploma delivers a full range of electrical engineering skills that will help you standout in the global market. The course covers: mathematics in engineering, electrical circuits, electrical power distribution, earthing and surge protection, electrical safety and wiring systems, energy use and efficiency, power quality, power cables and accessories, professional engineering practice, and much more. Enquire now for entry requirements, electrical engineering career outcomes, and the latest enrolment opportunities..

The Certificate III in Engineering – Mechanical Trade (MEM30219) is for trade apprentices (fitters and turners, toolmakers, metal machinists) or anyone needing an entry point into mechanical engineering. It’s a nationally recognised qualification that will teach you how to work in a manufacturing or engineering environment — performing complex measurements and working to quality standards. Enquire now for information about career outcomes and opportunities for enrolment..

The UEE50220 Diploma of Electrical and Instrumentation is for licensed electricians who wish to expand their professional reach to instrumentation, electrical engineering, and process plant technologies. Over 12-18 months of study you will learn how to install, commission, and maintain electrical control systems and other instrumentation — as well as write specifications for electrotechnology engineering projects. The course also covers electrical safety, sustainable energy, and compliance..

Graduates of the Doctor of Engineering (DEng) will be able to make original and significant contributions to the development, application, and evaluation of professional knowledge by engaging with practical problems of demonstrated importance to their employment context and the wider body of engineering and technical knowledge..

Graduates of the Doctor of Engineering (DEng) will be able to make original and significant contributions to the development, application, and evaluation of professional knowledge by engaging with practical problems of demonstrated importance to their employment context and the wider body of engineering and technical knowledge..

Become a mechanical fitter and machinist with the MEM30219 Certificate III in Engineering - Mechanical Trade (Fitting/Machining Trade). This nationally recognised qualification is part of an engineering trade apprenticeship and is delivered under the guidance of a qualified tradesperson. During your studies you’ll gain the foundational skills of engineering work (measurements, computations, tools, computer technologies, safety). You’ll also learn how to operate a range of machines and precision tools. Graduate a qualified tradesperson ready for work or higher education in mechanical engineering. Enquire now for the list of entry requirements, engineering career outcomes, and enrolment opportunities near you..

Become an engineering mechanical fitter with the MEM30219 Certificate III in Engineering - Mechanical Trade (Fitting Trade). This nationally recognised qualification is part of an engineering trade apprenticeship in mechanical fitting. During your studies you’ll be working under the guidance of a qualified tradesperson, learning how to perform engineering measurements and computations, use hand and power tools, and computer technologies. You’ll also gain specialist skills in mechanical fitting: general machining, lathe operations, mechanical cutting, installing plant and machinery, precision work, overhauling mechanical equipment, and much more. Enquire now for the list of study units, apprenticeship outcomes, and available course dates..

Become a qualified trade engineer with the MEM30219 Certificate III in Engineering - Mechanical Trade (Machining Trade). This nationally recognised qualification is part of a machinist apprenticeship. The course begins with the foundations of engineering work: measurements, computations, hand skills, computing technologies, safety and sustainability. You’ll then gain specialist machining skills under the guidance of a qualified tradesperson. Skills include: mechanical cutting, lathe operations, general machining, milling operations, grinding, precision work, assembling engineering components, and much more. Enquire now for entry requirements, trade engineering outcomes, and course availabilities near you..

Get a production role in raw materials manufacturing with the MSM30318 Certificate III in Manufactured Mineral Products. This nationally recognised qualification will teach you how to manufacture mineral products for industry, including cement, pre-cast concrete, pre-mixed concrete, quarry and asphalt. The course covers: on the job safety and situational awareness, workplace communication, cleaning workstations and equipment, taking measurements, interpreting technical drawings, reading dials and indicators, operating production equipment, receiving and despatching goods, storing materials for production, and much more. Enquire now for the full list of study units, manufacturing career outcomes, and the latest enrolment dates..

Get a trade qualification in fluid power engineering with the MEM40119 Certificate IV in Engineering (Fluid Power). This nationally recognised qualification is for licensed tradespersons (and apprentices) who need the skills to work with hydraulics and pneumatics technologies. The course covers: on-the-job safety, performing engineering measurements and computations, interpreting technical drawings, using computing technologies, using hand and power tools, maintaining fluid power control systems, modifying fluid power system operations, and much more. Enquire now for entry requirements, fluid power technical skills, and available course openings..

Become a production operator at a processing facility for metals or coal with the RII30420 Certificate III in Resource Processing. This nationally recognised qualification begins with the critical communication, safety, and environmental protocols of resources industry worksites — you’ll learn how to work in accordance with issued permits, quality standards, and safety procedures. You’ll then gain the technical skills you need to work as a production operator including pipeline pigging, transferring bulk fluids in (and out) of storage, managing startup and shut down of boilers, using automated plant/machinery, instruments that emit ionising radiation, and much more. Enquire now for the list of entry requirements, graduation competencies, and upcoming enrolment dates..

Level up your career as an auto-mechanic and get the skills you need to work on earthmoving machinery, excavators, cranes, hoists and other mobile plant. The AUR31220 Certificate III in Mobile Plant Technology is a nationally recognised qualification that will teach you how to safely diagnose and repair compression ignition engines, electrical circuits, diesel fuel injection systems, and a range of steering, hydraulic, and braking systems (on heavy machinery). Enquire now for the full list of study units and available electives, as well as the next batch intake dates..

Work at factories and processing plants as a qualified plant technician with the Certificate IV in Process Plant Technology (PMA40116). This nationally recognised training course is completed in the classroom and formalises your existing knowledge of processing plant operations. The course covers work health and safety, carrying out machine shutdowns and isolation, using computerised technology and data systems, plus optimising processing plant operations. Choose electives that support your actual job role: monitoring and controlling work permits, leadership and job-coaching, preventative maintenance, remote operations.Enquire now for the full list of electives and the next intake dates..

Work as a process operator or technician at factories, power and processing plants with the PMA30120 Certificate III in Process Plant Operations. This nationally recognised qualification has a technical focus and you’ll graduate with a range of skills directly related to your actual job role. The course includes: workplace safety, communication, and sustainability as well as job specific electives — confined spaces, workplace records and permits, machine and equipment maintenance, IT and data systems, piplelines and plant schematics, vehicle operation.Enquire now for career outcomes, training dates, and the next opportunities for enrolment..

Become a trade qualified engineer with the MEM40119 Certificate IV in Engineering. This nationally recognised training course begins with basic engineering trade skills: reading technical drawings, taking engineering measurements, performing computations, working safely in engineering, planning and completing work tasks, using hand tools and computing technologies. You’ll then begin ferrous (and non-ferrous) melting and casting operations, testing foundry related materials, advanced welding to code standards, and other technical skills. Enquire now for the full list of graduation competencies, entry requirements, and upcoming enrolment dates..

The Certificate II in Process Plant Operations (PMA20116) is a 12-week training course with a heavy focus on operational safety. It’s a nationally recognised qualification ideal for processing plant operators and technicians who need a formal qualification that recognises that skills and experience. You can also choose elective units that support your existing job role: working in confined spaces, operating breathing apparatus, working at heights, controlling minor incidents. Enquire now for a course schedule and the full list of elective options. .

The MEM20422 Certificate II in Engineering Pathways prepares you for an engineering apprenticeship or for higher education in the sector. This nationally recognised qualification will help you map out a career plan in the engineering and manufacturing industry, plus give you essential skills in welding, soldering, power tools and equipment. Graduate with a head start for an apprenticeship opportunity or for further study. Enquire now for a list of training centres, elective units, and a full course outline..