About Queensland Training and Development

The RII30920 Certificate III in Civil Construction is a nationally recognised qualification for anyone wanting to get started in road, bridge, or tunnel construction. The course introduces you to a civil construction jobsite, teaching you the safety and environmental protocols expected of all civil construction workers. You’ll learn to read plans and jobs specs, use a range of hand and power tools, and perform accurate measurements and calculations. The qualification then allows you to specialise in any of nine areas: bituminous surfacing, bridge construction, pipe laying, road construction, road marking, tunnel construction, timber bridges, traffic management, and general operational work. Enquire now for the list of course specialisations (and their availability in your area) as well as open course dates.

This qualification reflects the role of first medical response workers or volunteers who provide initial care to patients. These people provide basic first aid and emergency responses in the pre-hospital/out-of hospital environment./p>

This qualification reflects the role of pathology collectors. Workers in this role follow known routines and procedures, taking responsibility for their own work under general supervision. They combine communication, customer service and technical skills, and use discretion and judgement to adapt and transfer their skills to different situations.

This unit covers the skills and knowledge required to provide a first aid response to persons in line with the first aid guidelines determined by the Australian Resuscitation Council.

Our HLTAID011 Provide first aid course also includes the units of competency listed below:

• HLTAID009 Provide cardiopulmonary resuscitation
• HLTAID010 Provide basic emergency life support

Courses are run on a regular basis or on request! Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines. This unit applies to all workers who may be required to provide CPR, in a range of situations, including community and workplace settings.

Need to update your advanced CPR and O2 certs? HLTAID015 Provide Advanced Resuscitation and Oxygen Therapy is an accredited short-course that is recognised by the Australian Resuscitation Council (ARC). During your studies you will be learning how to respond to emergency situations and perform life saving resuscitation procedures, while employing specialised equipment and the ACR guidelines. The course covers: delivering oxygen therapy using a pulse oximeter, performing single and two-rescuer CPR, monitoring the condition of casualty, managing life-threatening bleeding, communicating with emergency services, documenting and reviewing incidents. Enquire now for entry requirements, certification outcomes, and upcoming enrolment dates.

The HLTAID012 Provide First Aid in an Education and Care Setting is a nationally recognised short course for teachers and child care workers who need skills in CPR and first aid. This course follows the guidelines of the Australian Resuscitation Council (ARC). The course covers: recognising and assessing emergency situations including asthma and anaphylactic reactions, ensuring the safety patients and bystanders (as well as yourself), performing CPR and essential first aid, liaising with emergency services, reporting incident details to parents and caregivers, completing written incident reports. Enquire now for upcoming enrolment dates and workplace first aid outcomes.

This qualification reflects the role of employees such as production operators in a metalliferous processing facility or a coal preparation and treatment plant, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.

These units of competency involves the skills and knowledge required to confine small emergencies in a facility and it applies to occupants who are required to have first attack firefighting skills.

It includes preparing for emergency situations, identifying and assessing an emergency, safely confining emergencies, using initial response equipment and reporting on the facility's emergency response.

These units of competency involves the skills and knowledge required to confine small emergencies in a facility and it applies to occupants who are required to have first attack firefighting skills.

It includes preparing for emergency situations, identifying and assessing an emergency, safely confining emergencies, using initial response equipment and reporting on the facility's emergency response.

This qualification reflects the role of emergency response and rescue team members working in the resources and infrastructure industries, who perform tasks involving a broad range of skilled applications in a wide variety of contexts, which involve some discretion and judgement in selecting equipment, services or contingency measures.

This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self or others.

This unit describes the skills and knowledge required to operate a forklift to shift, lift, transfer and place loads. It includes using forklift attachments safely and effectively. This unit applies to those working in site-based roles.

This course is beneficial for those working in operational roles, that require the operation of light vehicles on a worksite. This course also includes a defensive driving component.

This unit applies to those personnel working in operational roles. This unit covers the skills and knowledge that a person requires to operate a medium vehicle in the resources and infrastructure industries.

This unit describes the skills and knowledge required to operate and maintain a four wheel drive vehicle in the resources and infrastructure industries. It applies to those working in supervisory and technical specialist roles within the mining, civil, infrastructure and resources industries.

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries. It applies to those working in operational roles where they are required to enter or work around confined spaces.

This unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to find out if it safe for the proposed work. It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace.

This unit describes the skills and knowledge required to conduct lock risk in the resources and infrastructure industries.

It applies to those working in operational roles.

This unit of competency covers the knowledge and skills that are required to administer restricted analgesics to provide pain management as part of a medically supervised first responder organisation. This unit is applicable for personnel from emergency services, volunteer organisations or organisations that provide a medically supervised first aid service.

This unit covers the skills and knowledge required to isolate and access plant in the resources and infrastructure industries. It applies to those working in operational roles who undertaken work such as determining coordination requirements of isolating plants, dealing with energy sources and immobilisation of potential energy sources.

This unit describes the skills and knowledge required to supervise work in confined spaces in the resources and infrastructure industries. It applies to those working in Supervisory roles that are generally responsible for the output of others, contribute to the development of technical solutions to non-routine problems and apply management plans to the workplace.

This unit describes a participant's skills and knowledge required to test operational functions of vehicles and equipment in the coal mining, extractive and metalliferous mining sectors. This unit is appropriate for those working in operational roles.

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries. It applies to those working in operational roles in the mining, civil, drilling and other relevant industries.

This unit replaces RIIRIS402D Carry out the risk management process. It includes the knowledge and skills required to carry out risk management processes including; planning, identifying hazards, assessing risk and developing and implementing risk control.

Those working in supervisory roles and overseeing and auditing the risk assessment process, may find this unit applicable.