About COVE Training

Get your Traffic Control Licence with the nationally recognised short course RIIWHS205E - Control Traffic with Stop-Slow Bat. This training is an approved traffic controller training course in some Australian states and will teach you how to control vehicle and pedestrian traffic using stop-slow bats, hand signals, and approved communication devices. Competencies include: wearing correct PPE and high-vis clothing, following work instructions and site procedures, using communication devices and electronic equipment, reporting traffic offenders, responding to accidents and emergency situations. Enquire now for upcoming enrolment dates and information about traffic controller accreditation..

Get your Traffic Control Licence with the nationally recognised short course RIIWHS205E - Control Traffic with Stop-Slow Bat. This training is an approved traffic controller training course in some Australian states and will teach you how to control vehicle and pedestrian traffic using stop-slow bats, hand signals, and approved communication devices. Competencies include: wearing correct PPE and high-vis clothing, following work instructions and site procedures, using communication devices and electronic equipment, reporting traffic offenders, responding to accidents and emergency situations. Enquire now for upcoming enrolment dates and information about traffic controller accreditation. PLEASE NOTE: always check with your course provider before enrolment if you are seeking accreditation as a traffic controller..

Become a registered electrical spotter with the 22597VIC Course in Workplace Spotting for Service Assets. This hands-on short course is recognised by Energy Safe Victoria (ESV) and is the training requirement for obtaining your three (3) year spotter’s licence. The course covers: identifying and addressing workplace hazards associated with plant operating close to overhead (and underground) power assets, carrying out pre-start activities and safety checks, responding to emergencies and providing workplace first aid. Enquire now for the list of ESV competencies and licensing outcomes, as well as upcoming course enrolment dates near you..

Do you need an excavator training course? How about the RIIMPO320F Conduct Civil Construction Excavator Operations. This nationally recognised short course will teach you how to safely use an a excavator (with attachments) and supports the excavator licence requirements in some states. The course covers: carrying out pre-operational checks, carrying and placing materials with the excavator, loading, bulk excavation, fitting and removing attachments, relocating the machine, carrying out operator maintenance, cleaning up. Enquire now for prices, excavator licensing accreditations, and upcoming enrolment dates in your area..

Get your Construction Industry White Card with the CPCWHS1001 Prepare to work safely in the construction industry. This nationally recognised short course is mandatory for anyone who routinely enters a construction site in Australia, including site managers, tradies, apprentices, surveyors, and labourers. During your studies, you will learn your WHS responsibilities and develop skills in hazard identification and risk control. The course covers: using Personal Protective Equipment (PPE), understanding safety signs, reporting hazards, incident and emergency responses, interpreting safety documents, and more. Enquire now for the full list of White Card competencies and training providers near you that offer this short course..

The RIIHAN301E Operate an Elevating Work Platform outlines the skills and knowledge necessary to operate an elevating work platform within the Resources and Infrastructure Industries. It covers the safe operation of the platform at various heights, ensuring compliance with industry standards and regulations. This competency applies specifically to individuals in operational roles who are responsible for the safe and effective use of elevating work platforms in their work environments. Enquire now for a full list of entry requirements and available enrolment dates..

The TLILIC0003 Licence to Operate a Forklift Truck unit provides skills and knowledge to operate a forklift safely under legislative requirements. Completion of this unit does not grant a High Risk Work Licence (HRWL) for forklift operation. A forklift truck includes powered industrial trucks with lifting media like masts and load carriages. Operators require a separate HRWL for forklift trucks, distinct from licences for pedestrian-operated trucks or pallet trucks. Enquire now for a full list of entry requirements and available enrolment dates..

The RIIMPO318F Conduct Civil Construction Skid Steer Loader Operations provides comprehensive training in the safe and effective operation of skid steer loaders on civil construction sites. Participants will learn to plan and prepare for operations, load, carry, and distribute materials, and use attachments as required. This unit is essential for individuals in site-based roles within the civil construction industry, offering practical skills in skid steer loader operations and housekeeping activities. Enquire now for the full list of entry requirements and available enrolment dates..

The RIIMPO317F Conduct Roller Operations provides hands-on training in roller operations applicable to various practical industries. Participants will learn to plan, prepare, and operate rollers to compact materials according to workplace requirements. The course also covers roller relocation preparations and housekeeping activities. This unit is essential for individuals in site-based roles seeking proficiency in roller operation. Enquire now for the full list of entry requirements and available enrolment dates..

The TLILIC0005 Licence to Operate a Boom-type Elevating Work Platform (Boom Length 11 Metres or More) outlines the requirements for safely using a boom-type Elevating Work Platform (EWP) of 11 metres or longer. It covers operating procedures in compliance with legal standards. Holding this licence does not automatically confer a High Risk Work Licence (HRWL) for operating such equipment. A boom-type EWP includes telescopic, hinged, articulated devices, or their combinations, used to elevate personnel, equipment, and materials. Successful completion necessitates the possession of a boom-type EWP HRWL. Enquire now for a full list of entry requirements and available enrolment dates..

The CPCCLDG3001 Licence to Perform Dogging includes training in slinging techniques, selecting and inspecting lifting gear, and directing crane operators when loads are out of view. This unit specifies the skills and knowledge needed to perform dogging work safely, including moving loads using cranes or hoists in the construction and other industries. Enquire now for a full list of entry requirements and available enrolment dates..

The TLILIC3017 Licence to Drive a Heavy Combination Vehicle is required for operating articulated vehicles with three axles or more in Australia. This licence permits driving a prime mover with a single semi-trailer or a heavy vehicle plus a trailer over 9 tonnes GVM. The course includes theory and practical training, followed by an assessment. It covers vehicle control, traffic monitoring, vehicle management, trailer coupling/uncoupling, and handling hazardous situations, ensuring learners gain the necessary skills and knowledge for the licence. Enquire now for a full list of entry requirements and available enrolment dates..

The TLILIC2016 Licence To Drive A Heavy Rigid Vehicle is required for driving heavy ridged vehicles in Australia as per Safe Work Australia. A heavy rigid vehicle is a bus or truck, including a prime mover or mobile crane, with over 8 tonnes Gross Vehicle Mass (GVM) and 3 or more axles. This unit covers the skills and knowledge needed to control vehicle functions, monitor traffic, manage vehicle conditions and performance, and handle hazardous situations effectively. Enquire now for a full list of entry requirements and available enrolment dates..

The TLILIC2015 Licence to Drive a Medium Rigid Vehicle is essential for operating or driving a medium rigid vehicle in Australia, as specified by Safe Work Australia. This licence permits the driver to operate any two-axle rigid vehicle, including trucks and buses, and tow trailers up to 9 tonnes GVM. The unit covers skills and knowledge for vehicle control, traffic and road monitoring, vehicle condition management, and handling hazardous situations. Enquire now for a full list of entry requirements and available enrolment dates..

The RIIHAN308F Load and Unload Plant provides candidates with the essential skills and knowledge to safely and efficiently load and unload plant on floats or trailers. Ensuring plant and equipment are loaded and secured correctly is crucial for road safety. This unit applies to those working in site-based roles within the Resources and Infrastructure Industries, equipping participants with the necessary competencies for these tasks. Enquire now for a full list of entry requirements and available enrolment dates..

The RIISS00061 Traffic Management Implementer Skill Set for High Volume Roads is intended for learners who have completed TMI1 and have experience setting up at least 12 types of temporary traffic management on Category 1 roads. It prepares them to manage traffic on High Volume Roads (Category 2). This focuses on the knowledge and competencies needed to implement traffic management in Temporary Traffic Management Category 2 environments, following guidelines outlined in the Austroads Guide to Temporary Traffic Management. Enquire now for a full list of entry requirements and available enrolment dates. .

The RIIWHS204E Work Safely at Heights training accreditation is suitable for those required to work at heights. It provides essential skills and knowledge for safely working at heights across various industries, including resources, quarrying, drilling, agriculture, government, defence, manufacturing, heavy industry, and construction. This unit describes the competencies needed to work safely at heights in resources and infrastructure sectors, applying to operational roles under supervision, involving known routines and procedures, with responsibility for work quality outcomes. Enquire now for a full list of entry requirements and available enrolment dates..

The RIIRTM301E Operate Truck or Trailer Mounted Attenuators course imparts the skills and knowledge to operate truck or trailer-mounted attenuators for traffic management at maintenance and civil construction sites. This includes planning, preparation, radio communication, positioning the attenuator, using other traffic controls, and cleanup. Enquire now for a full list of entry requirements and available enrolment dates..

The TLILIC2014 Licence to Drive a Light Rigid Vehicle course provides essential skills and knowledge for obtaining a light rigid vehicle licence. It covers efficient vehicle control, traffic and road condition monitoring, vehicle performance management, and handling hazardous situations. Successful participants receive a Certificate of Competence to present to VicRoads for an official licence. Enquire now for the full list of entry requirements, and available enrolment dates..

The RIISS00059 Traffic Controller Skill Set for High Volume Roads addresses the skills and knowledge required for managing traffic control in Temporary Traffic Management Category 2 environments, as outlined in the Austroads Guide to Temporary Traffic Management. Enquire now for the full list of entry requirements, and available enrolment dates..