All DLI Training Courses
This training course is based on the national unit of competency HLTAID009 Provide cardiopulmonary resuscitation. HLTAID009 is the new national course code that replaces the old HLTAID001 code, so by completing this course with DLI Training, you can be assured that you are getting the most current CPR certi?cation possible.
Cardiopulmonary Resuscitation (CPR) is the name given to the technique of combining rescue breaths with external cardiac compressions.
This unit applies to all persons who may be required to provide CPR, in a range of situations, including community and workplace settings.
Learn moreControl traffic with a stop-slow bat or portable traffic control devices.This course addresses the skills and knowledge for those responsible for stopping and starting traffic in temporary traffic management using a stop/slow bat or boom gate.
This program is a good entry point for those wishing to establish themselves into the traffic control/management industry.
Learn moreIf you are considering a career as an excavator operator, investing in proper training is essential to ensure your success in the industry. DLI Training in Sydney offers comprehensive excavator operator training that equips individuals with the necessary skills and knowledge to excel in this field. With their experienced instructors and state-of-the-art facilities, DLI Training provides hands-on training that covers all aspects of operating an excavator safely and efficiently.
Learn moreThe white card unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm.
It covers identifying and orally reporting common construction hazards for responding to potential incidents and emergencies. It also covers correctly selecting and ?tting common personal protective equipment (PPE) used for construction work. DLI Training are leaders in white card training across Sydney and Auburn.
White card training plays a crucial role in the construction industry and its relative services. It is essential for all workers to undergo this training to ensure their safety and the safety of others on site. Our white card training in Auburn provides workers with a comprehensive understanding of occupational health and safety practices, risk management, and emergency procedures. By completing this training, construction workers are equipped with the necessary knowledge and skills to minimise accidents, promote workplace safety, and comply with legal requirements.
Learn moreThis unit is required for all Asbestos Containing Material (ACM) removal workers engaged in the removal of non-friable ACM in quantities more than 10m2.
Project sites for removal of non-friable asbestos include construction sites, ships and soils.
The model work health and safety (WHS) regulations and the Code of Practice: How to safely remove asbestos (2018) requires workers to hold certi?cation for the class of licensed asbestos removal work they will be undertaking.
Learn moreCPCCDE3015 – Remove friable asbestos specifies the outcomes required to remove friable asbestos-containing material (ACM).
Remove friable asbestos training includes preparing, containing and removing friable ACM, and knowledge and application of decontamination and disposal requirements.
SafeWork NSW acknowledges only the CPCCDE3015 Remove Friable Asbestos statements of attainment issued by approved training providers. DLI Training is both approved by SafeWork NSW and accredited by the Australian Skills and Quality Authority (ASQA) to provide this nationally-recognised training course.
Learn moreThis unit of competency speci?es the outcomes required to supervise the removal process for friable and non-friable asbestos containing material (ACM).
The unit includes planning for and supervising the removal process, including preparing the work area and the worksite, using safe and compliant removal practices, maintaining safety procedures, and supervising the decontamination and removal processes.
Ensuring compliance with the asbestos removal control plan (ARCP) is central to the e?ective performance of the role. This includes ensuring and documenting that required air monitoring and other testing and certi?cation processes are conducted by licensed asbestos assessors according to legislation.
Learn moreAt DLI Training, our mission is to be an industrial hub for students to connect with the right industries through proper nationally recognised EWP training and EWP ticket course qualifications in Sydney. Completing an accredited yellow card course with us will ensure that you get proper EWPA yellow card training relevant to your industry, helping you achieve the necessary skills to be an invaluable asset in your workplace.
Learn moreGet ready to lift your career to new heights with DLI Training’s proper forklift licence training course in Auburn. Whether you’re a beginner or an experienced operator, this training is essential for safety, efficiency, and compliance with industry regulations. Gain the skills and knowledge needed to operate forklifts confidently and responsibly. With a proper forklift licence in Sydney, you’ll open doors to new job opportunities and ensure a secure future in the world of logistics and warehousing.
Learn moreThis unit describes the skills and knowledge required to conduct wheeled front end loader operations.
This unit applies to those working in site- based roles.
Learn moreThis unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to ?nd out if it is safe for the proposed work.
It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a speci?c area or workspace. The competency requires the person to interpret readings and take actions based on the interpretation.
Working environment may be hazardous, unpredictable, subject to time pressure, chaotic and expose responders to risk, on land or water, by day or night. Workplace atmospheres may include visible and invisible hazards and hazardous surfaces.
Learn moreHaul truck training unit of competency describes the skills and knowledge required to operate, load, haul, and dump materials using an articulated haul truck. This unit applies to those who work in operational roles. This unit applies to both front and rear dumping haul trucks.
Learn moreThis unit describes the skills and knowledge required to operate a backhoe/loader to load, distribute and place materials.
This unit applies to those working in site based roles.
Learn moreEnrolling at DLI Training means gaining access to top-notch instructors who are experts in the field. They will guide you through comprehensive training modules, ensuring that you develop a strong foundation of knowledge and practical skills. Our skid steer loader training course in Sydney is created to accommodate all skill levels, whether you are a novice or have some expertise.
Learn moreDLI TRAINING provides you with the Gold Card from TSHA as well as a Statement of attainment for the unit RIIHAN309F operating Telescopic Material Handler, which is an accredited course.
The Telehandler Gold Card Training Program in Sydney has been designed for people needing to develop the skills and knowledge required to operate Telescopic Materials Handlers.
Learn moreThis unit specifies the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) where the length of the boom is 11 metres or more in accordance with all relevant legislative requirements. Competence in this unit does not in itself result in a Risk Work Licence (HRWL) to operate this plant.
Learn moreThis course covers all the requirements for obtaining a national High Risk Work Licence for Order Picking forklifts (LO). Successfully completing this course will allow you to operate order picking forklift within Australia.
Learn moreThis competency standard specifies the skills and knowledge needed to showcase the use of initial firefighting equipment. This involves guiding clients on the proper and safe use of portable fire extinguishers, fire hose reels, and fire blankets during emergencies. The firefighting equipment course is aimed at those who are just starting out and need some guidance from the pros as they handle their day-to-day tasks.
Learn moreThis unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure sectors.
Learn moreApply WHS requirements, policies and procedures in the construction industry covers fundamental WHS requirements necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity.
You will learn how to identify and assess risks, identify hazardous materials and other hazards on the worksite, plan prepare and apply safe work practices, and follow emergency procedures.
Learn more