About Australian Training Management

TLI30122 - Certificate III in Mobile Crane Operations is designed for mobile crane operation within the Transport and Logistics Industry and other industries. It involves a broad range of skilled applications applied in a wide variety of contexts. Successful achievement of the high risk work (HRW) and heavy vehicle licensing units in the qualification must align with applicable licensing and regulatory requirements.

This qualification reflects the role of individuals working as skilled operators in civil construction, who apply a broad range of skills in varied work contexts, using some discretion and judgement and relevant theoretical knowledge.

This qualification reflects the role of individuals such as production operators, working in open cut coal or metalliferous mines or quarries, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.

RII20220 - Certificate II in Surface Extraction Operations is designed for production operators working on sites such as an open cut coal mine, a quarry or an open cut metalliferous mine, undertaking a prescribed range of tasks involving known routines and procedures, and taking some responsibility for the quality of work outcomes.

This qualification reflects the role of individuals working in an operational role in civil construction, who undertake a prescribed range of tasks using limited practical skills and fundamental knowledge, in a defined context working under supervision.

This qualification reflects the role of individuals working as skilled operators with civil construction plant, who apply a broad range of skills in varied work contexts, using some discretion and judgement and relevant theoretical knowledge. These individuals may provide theoretical advice and support a team.

This Provide First Aid training course is designed to provide the first response skills and techniques required to successfully meet the nationally recognised Unit of Competence HLTAID011 Provide First Aid from the Health Training Package. The course is suitable for individuals within any workplace, or for personal development needs.

This Provide Cardio Pulmonary Resuscitation training course is designed to provide the skills and techniques required to successfully meet the nationally recognised Unit of Competence HLTAID009 - Provide Cardiopulmonary Resuscitation from the Health Training Package. The course is suitable for individuals within the workplace, or for personal needs.

This Excavator Operator certification program provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

This course is aligned to the nationally recognised unit RIIMPO320F Conduct civil construction excavator operations which specify the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, the fitting, use and removal of attachments and operator maintenance activities.

Since 2009 the construction industry induction in WA has been based on a nationally recognised training unit of competence. Under amended regulations, in States and Territories, both types of WA cards issued through training providers will be accepted by the regulatory authority as evidence that construction induction training has been successfully completed. Those people who have completed the previous ‘bluecard’ Course in Safety Awareness Training will not have to repeat the training. This course is suitable for any individual wishing to work in the WA construction industry.

This asbestos removal training course prepares participants for the removal of non-friable asbestos, by providing individuals with the necessary skills and knowledge to enable them to safely prepare for, contain and removing asbestos containing materials (ACM), including decontamination, disposal and legislative requirements and processes. This asbestos removal course is suitable for individuals working as an asbestos removalist in a variety of industries.

The model Work Health and Safety (WHS) regulations and the Code of Practice: How to safely remove asbestos (2018) requires workers to hold certification for the class of licensed asbestos removal work they will be undertaking. Completion of this unit of competency is certification to undertake non-friable (Class B) removal work.

Occupational licenses are required nationally. This unit is required for all ACM removal workers engaged in the removal of more than ten square metres of non-friable ACM.

The Supervise Asbestos Removal course specifies the outcomes required to supervise the removal process for friable and non-friable asbestos containing materials (ACM).

The course includes planning for and supervising the removal process, including preparing the work area and the worksite, using safe and compliant removal practices, maintaining safety procedures, and supervising the decontamination and removal processes.

Ensuring compliance with the asbestos removal control plan (ARCP) is central to the effective performance of the role. This includes ensuring and documenting that required air monitoring and other testing and certification processes are conducted by licensed asbestos assessors according to legislation.

Site locations include domestic, commercial, demolition and construction, ships, soils and fences.

It is designed to instruct trainees how to safely and efficiently lift and move loads using an overhead bridge or gantry crane in a variety of situations.

This course provides participants with the required skills and knowledge to enable them to use chainsaws in a safe and proficient manner in the workplace. Students will learn how to inspect, adjust, safely operate and carry out basic saw maintenance, including mixing fuels, air filter cleaning, blade tension adjustment and saw sharpening.

This course provides participants with the required skills and knowledge to enable the use of a quick cut saw in a safe and proficient manner in the workplace. Individuals will learn how to inspect, safely operate and carry out basic saw maintenance, including mixing fuels, air filter cleaning and blade change. The course is aligned to the of Code of Practise for Concrete and Masonry Cutting and Drilling which outlines the procedures that should be followed when using a quick cut saw and addresses the nationally recognised unit RIISAM204E - Operate Small Plant and Equipment. This course is suitable for any individual.

This course provides participants with the information and guided practice on the machine so operators can demonstrate theoretical and practical competence to, or beyond, the licensing standards. This forklift training program is designed to qualify forklift operators under the High Risk Licence Regulations that came into effect in October 2007. This course is suitable for any individual.

This Front End Loader Operator certification program provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

This course is aligned to the nationally recognised unit RIIMPO321F Conduct civil construction wheel loader operations which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, the fitting, use and removal of attachments and operator maintenance activities.

This course provides participants the required skills and knowledge to enable them to safely carry out gas testing of an atmosphere prior to entering a specific area or workspace. Testing involves the use of electronic test apparatus. The competency requires participants to interpret readings and take actions based on the interpretation. This course is suitable for anyone who requires to gas test the atmospheric content of an area.

The Articulating Haul / Dump Truck Operator certification program provides information and guided practice that will equip operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

The course is aligned to the nationally recognised unit RIIMPO337E Conduct articulated haul truck operations, which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, and operator maintenance activities.

The Skid Steer Loader Operator certification program provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

The course is aligned to the nationally recognised unit RIIMPO318F - Conduct civil construction skid steer loader operations, which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, the fitting, use and removal of attachments and operator maintenance activities.

This tilt up panel course provides participants with the required safe precast concrete and tilt-up construction work knowledge prior to entering tilt-up construction workplaces or sites. This course addresses the outcomes required for safe precast concrete and tilt-up work induction training within the construction industry, and is suitable for individuals requiring access to any construction industry workplace or sites.

The RIIHAN311F – Conduct Operations with Integrated Tool Carrier course equips participants with the knowledge and practical skills required to safely and effectively operate an integrated tool carrier in a variety of workplace settings. This unit focuses on ensuring compliance with relevant safety standards, workplace procedures, and manufacturer specifications while carrying out operations.

This Roller Operator certification program provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

This course is aligned to the nationally recognised unit RIIMPO317F - Conduct roller operations which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, the fitting, use and removal of attachments and operator maintenance activities.

This course provides participants with the skills and knowledge required to safely conduct routine six-monthly (level 1) and annual (level 2) inspections, servicing and maintenance, and testing/tagging of fire extinguishers, fire blankets and fire hose reels in accordance with relevant Australian standards. The course provides a blend of theoretical instruction with practical training in relation to the testing of firefighting equipment and is suitable for everyone.

The Telescopic Materials Handler Operator certification program provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

The course is aligned to the nationally recognised unit RIIHAN309F Conduct telescopic materials handler operations, which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, the fitting, use and removal of attachments and operator maintenance activities.

The Water Truck Operator certification program follows on from the haul / dump truck training course and provides information and guided practice that will equip experienced operators with the skills necessary to demonstrate competence to the minimum national certification standards (NOHSC7019) and to lay the foundation skills of new operators so that they can, in a safe manner, continue to improve their skills and proficiency whilst operating the machine.

The course is aligned to the nationally recognised unit RIIMPO326E - Conduct water vehicle operations, which specifies the outcomes required including planning and preparation for work, the conduct of operational checks, the safe and effective operation of the machine for a range of mandatory tasks, and operator maintenance activities.

This course provides participants with the required skills and knowledge to enable them to safely perform advanced scaffolding work in a variety of situations in compliance with Work Safe WA Licencing Requirements, Industry Standards and OSH Regulations. Our course is aligned to the nationally recognised Unit CPCCLSF2001 - Licence to erect, alter and dismantle scaffolding basic level which specifies the outcomes required to undertake basic scaffolding work. The Scaffolding work required will be the erecting, altering or dismantling of a temporary structure to support a platform from which a person or object could fall more than four metres.

This course provides participants with the required skills and knowledge to enable them to safely perform intermediate scaffolding work in a variety of situations in compliance with Work Safe WA Licencing Requirements, Industry Standards and OSH Regulations. Our course is aligned to the nationally recognised Unit CPCCLSF3001 Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level which specifies the outcomes required to undertake intermediate scaffolding work. The Scaffolding work required will be the erecting, altering or dismantling of a temporary structure to support a platform from which a person or object could fall more than four metres.

This course provides participants with the information and guided practice on the machine so that new and experienced operators can demonstrate theoretical and practical competence to, or beyond, the licensing standards. This elevating work platform training program is designed to qualify elevating work platform operators under the High Risk Licence Regulations that came into effect in October 2007. This course is suitable for any individual.

This course can also be presented for operators of elevating work platforms with a height capacity of less than 11m who do not require a High Risk License.

The aim of the non-slewing crane and dogging training is to impart to participants the necessary knowledge and skills to equip them to safely and efficiently lift and move a load using a non-slewing mobile crane.

The course is aligned to the nationally recognised unit TLILIC0040 - Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) which specifies the outcomes required to complete job requirements, monitoring lift conditions, implementing shut-down procedures, packing up crane after operations, and completing all required job records.

The aim of this training is to impart to participants the necessary knowledge and skills required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) over 100 tonnes, in accordance with all relevant legislative responsibilities.

The course is aligned to the nationally recognised unit TLILIC0020 - Licence to operate a slewing mobile crane (over 100 Tonnes) which specifies the outcomes required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 20 tonnes, in accordance with all relevant legislative responsibilities.

The aim of this training is to impart to participants the necessary knowledge and skills required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 100 tonnes, in accordance with all relevant legislative responsibilities.

The course is aligned to the nationally recognised unit TLILIC0021 - Licence to operate a slewing mobile crane (up to 100 Tonnes) which specifies the outcomes required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 100 tonnes, in accordance with all relevant legislative responsibilities.

The aim of this training is to impart to participants the necessary knowledge and skills required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 20 tonnes, in accordance with all relevant legislative responsibilities.

The course is aligned to the nationally recognised unit TLILIC0022 - Licence to operate a slewing mobile crane (up to 20 tonnes) which specifies the outcomes required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 20 tonnes, in accordance with all relevant legislative responsibilities.

The aim of this training is to impart to participants the necessary knowledge and skills required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 60 tonnes, in accordance with all relevant legislative responsibilities.

The course is aligned to the nationally recognised unit TLILIC0023 - Licence to operate a slewing mobile crane (up to 60 tonnes) which specifies the outcomes required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 60 tonnes, in accordance with all relevant legislative responsibilities.

This dogging course provides participants with the required skills and knowledge to enable them to safely and efficiently sling loads in a variety of situations in compliance with Work Safe WA Standards and Regulations. The course is aligned to the nationally recognised unit CPCCLDG3001 Licence to perform dogging which specifies the outcomes required to undertake basic dogging work, both in sight and out of sight of the crane operator, for the purpose of shifting loads mechanically and includes selecting sling types and sizes and maintaining the stability of the load. This course is suitable for anyone requiring to sling or shift loads within the workplace.

The basic riggers course provides participants with the required skills and knowledge to enable them to safely and conduct rigging in a variety of situations in compliance with Work Safe WA Standards and Regulations. The course is aligned to the nationally recognised unit CPCCLRG3001 - Licence to perform rigging basic Level which specifies the outcomes required to undertake basic rigging work

This intermediate riggers course provides participants with the required skills and knowledge to enable them to safely and conduct rigging in a variety of situations in compliance with Work Safe WA Standards and Regulations. The course is aligned to the nationally recognised unit CPCCLRG3002 - Licence to perform rigging intermediate level which specifies the outcomes required to undertake intermediate rigging work.

This course provides the skills and knowledge required to work safely and follow WHS policies and procedures in the Resources and Infrastructure Industries This course is designed and appropriate for those working in operation roles.

At the completion of the training program you will have gained an understanding of the new WHS national legislation along with a range of safety related topics adaptable to a broad range of industry.

This qualification is designed for mobile crane operation within the transport and logistics industry and other industries. Successful achievement of the high risk work (HRW) and heavy vehicle licensing units in the qualification must align with licensing and regulatory requirements.

The aim of this training is to provide the skills and knowledge required to identify, locate and protect underground services in preparation of a site for construction or mining operations including searching for known or potential services or utilities which may exist under the surface of a specified excavation site.

This LVR & CPR training program is designed to provide the skills and techniques required to successfully meet the nationally recognised Units of Competence UETDRMP007- Perform rescue from a live low voltage panel and HLTAID009 - Provide cardiopulmonary resuscitation. The course is suitable for individuals within the workplace.

This course provides skills and knowledge through a blend of meaningful theoretical instruction with practical training, based on simulated workplace situations. This aids participant understanding of the hierarchy of hazard control, the forces generated in falls, specific hazards such as pendulum effect, swing back and suspension trauma.

This course also illustrates the selection, inspection, application and maintenance of anchor points, harnesses, and other height safety equipment as well as addressing other height safety topics such as ladders, temporary scaffolds and working in elevated work platforms (not including WP certification).

This course is suitable for any individual who is required work at height.

This course provides participants with the required knowledge and skill to equip them to safely supervise work in tilt-up construction. The course provides a blend of meaningful theoretical instruction with practical training based on simulated tilt-up construction situations and practical application on site of safe tilt-up construction procedures. This course is suitable for those who supervise tilt-up construction activities.

This demolition course prepares participants for the conduct of basic demolition activities, by providing individuals with the necessary skills and knowledge to enable them to safely plan and conduct class one, two or three demolition activities on single storey buildings and structures in accordance with Western Australian Regulations and Australian Standards. This course is suitable for individuals working as basic demolition operatives, working under the supervision of other more experienced site supervisors and demolition experts.

This course provides participants with the required skills and knowledge to enable them to safely enter and work in areas designated as a confined space and enable them to safely carry out gas testing of an atmosphere prior to entering a specific area or workspace. The course provides a blend of meaningful theoretical instruction with practical training based on simulated workplace situations. This course is suitable for anyone required to work in a confined space and performing gas testing.

This course provides participants with the required skills and knowledge to load, unload and to secure cargo in accordance with relevant state / territory roads and traffic authority regulations and permit requirements. It also includes lashing and unlashing cargo / containers, protecting cargo from weather and packing and unpacking cargo, and the completion of required documentation.

The course provides a blend of meaningful theoretical instruction with practical training based on simulated workplace situations. This course is suitable for anyone working in the transport & logistics environment and other relevant industries.

This course provides participants with the safety skills and knowledge for ALL personnel involved in storing, handling, working near, or supervising the use of, hot bituminous materials and asphalt. The course is suitable for anyone working within the proximity of hot bitumen or asphalt; such as sealing and asphalt crews, tanker drivers and bitumen storage site operators, supervisors, managers, contractors on a site, or plant and non-field staff involved in directing others to use bitumen products.