About Access Training Centre

This CPR course provides the knowledge and skills required to maintain life in an unconscious patient until medical aid arrives.

Please note: it is an assessment requirement of this course that the participant be able to competently perform 2 minutes of continuous adult CPR on the floor.

On successful completion of the course students will be issued with a Statement of Attainment for the unit of competency CPCWHS1001 Work Safely in the Construction Industry and their photo ID White Card.

This overhead training course provides learners with the skills and knowledge required to shift loads using gantry equipment in accordance with workplace and regulatory requirements. This course is suitable for operators of overhead cranes that are remote operated and have three or less powered movements.

On successful completion of this course learners will be issued Statement of Attainment and ATC issued Competency Card.

This course is designed to provide the participants with the skills and knowledge to set up and operate a Vehicle Loading Crane (capacity less than 10 metre tonnes) safely in accordance with workplace requirements.

This course is designed to provide the participants with the necessary knowledge and skills to operate Boom Lift with a platform height of 11 metres & under and Scissor Lift in a safe and competent manner in line with workplace requirements under duty of care.

This course is designed to assess the skills and knowledge of participants when using, maintaining and storing chainsaws according to manufacturer’s specifications, cutting methods and knowledge of environmental impact.

This course achieves the competency required to Operate a Breathing Apparatus for the purpose of carrying out work or inspections inside Confined Spaces. This unit includes assessment of pre start checks, fitting and removing BA, operation and storage requirements.

This course achieves the competency required to work in a confined space (enclosed or partially enclosed) for the purpose of carrying out work or inspections. The units in this course cover persons required to enter confined space under an issued permit for any purpose including maintenance, cleaning, inspection or other reasons, who will be required to wear breathing apparatus as part of their normal work, and who need the skills and knowledge to test the working atmosphere using elec-tronic test apparatus to find out if it is safe for the work to take place.

Our 2 day Forklift Training Course is designed for people with minimal or no forklift experience.

This unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to find out if it is safe for the proposed work. Workplace atmospheres may include visible and invisible hazards and hazardous surfaces. It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace. The competency requires the person to interpret readings and take actions based on the interpretation.

Licence to Erect, Alter and Dismantle Scaffolding Basic Level

This course is designed to provide the participants with the base skills and knowledge to undertake Basic Scaffolding activities at work in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work

Our 2 day EWP Training Course is designed for participants with minimal or no Boom Lift Operating experience.

To provide the learner with the skills and knowledge to undertake activities related to Boom Type Elevated Work Platform Operation in accordance with the Work Health and Safety Act and Regulations (SA) 2012 as well as Safe Work Australia’s National Standard for Licensing Persons Performing High Risk Work.

This Course is to provide the participants with the skills & knowledge to undertake Bridge and Gantry crane operation in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work.

This course is designed to provide the participant with the skills and knowledge to operate a Non Slewing Mobile Crane (CN) in accordance with Safe Work Australia's National Standard for Licencing Persons performing High Risk Work.

To provide the participant with the skills and knowledge to operate a Reach Stacker in accordance with the WHS Act and Regulations SA 2012.

To provide the participant with the skills and knowledge to operate a Slewing Mobile Crane up over 100 tonne capacity (C0) in accordance with Safe Work Australia’s National Standard for Licencing Persons Performing High Risk Work (April 2006

This Course provides the participant with the skills and knowledge to operate a Slewing Mobile Crane up to 100 tonne capacity (C1) in accordance with Safe Work Australia’s National Standard for Licencing Persons Performing High Risk Work (April 2006).

This Course provides the participant with the skills and knowledge to operate a Slewing Mobile Crane up to 20 tonne capacity (C2) in accordance with Safe Work Australia’s National Standard for Licencing Persons Performing High Risk Work (April 2006)

This course is to provide the participant with the skills and knowledge to operate a Slewing Mobile Crane up to 60 tonne capacity (C6) in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work.

This course is to provide the participant with the skills and knowledge to operate a Vehicle Loading Crane (CV) in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work.

This course is designed to provide the participants with the skills and knowledge to undertake activities related to Order Picker Operation in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work (April 2006).

Our 5 day Dogging Course is to provide the participant with the skills and knowledge to undertake Dogging activities at work in accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work.

This course is to provide the participant with the skills and knowledge to undertake Basic Rigging Activities in Accordance with Safe Work Australia's National Standard for Licencing Persons Performing High Risk Work.

To provide the participant with the skills and knowledge to undertake Rigging Intermediate activities in accordance with Safe Work Australia’s National Standard for Licensing Persons Performing High Risk Work.

To provide learners with the a comprehensive understanding of the hazards associated with the handling and transport of dangerous goods by road. This course provides learners with the skills and knowledge to interpret HAZCHEM codes, Australian Goods Code (ADG Code) and all of the state related requirements to obtain a dangerous goods (DG) driver licence to transport Dangerous Goods.

This course provides participants with the skills and knowledge required to load and unload goods and cargo, including loading and unloading goods, securing and protecting the load and completing all required documentation.

This combined Traffic Controller and Traffic Management Implementer introduction course provides Learners with the skills and knowledge to implement traffic management plans and control traffic on urban streets and low volume rural roads (Category 1) in South Australia

This course is designed for Learners who have completed TMI1, have experience of setting up at least 12 temporary traffic management types on Category 1 roads and will now be responsible for traffic management implementation on High Volume Roads (Category 2).

This course consist of Training (1 Day) + Post course experience + Assessment (1 Day)

This is an introduction course for Learners who will be responsible for traffic management implementation on urban streets and low volume rural roads (Category 1).

This Course provide learners with the skills and knowledge to undertake safe working practices when working at heights in the resources and infrastructure industries. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

On successful completion of this course learners will be issued: Statement of Attainment and a competency Card issued by ATC